HZB Newsroom

The team at the IRIS beamline at BESSY II has created a new experimental option: They achieved infrared nanoscopy with a spatial resolution of around 50 nm at very long THz wavelengths. This was possible thanks to a temporal pattern of light pulses known as the low-alpha operating mode at BESSY II. Worldwide, BESSY II is the only synchrotron light source at which users could perform nanoscopy in a single setup from 25 to 4000 cm^-1, a unique opportunity for ultra-broadband characterisation of complex materials at the nanoscale in both the life sciences and materials sciences.

The thinner an iron film, the more easily it can be demagnetised by a laser pulse. Researchers at the University of Duisburg-Essen, working with Helmholtz-Zentrum Berlin and other partners, have discovered why: the key lies in the magnetic order at the material's interfaces. In the long term, these findings could contribute to the development of new technologies for magnetic data storage. The results have been published in the scientific journal Advanced Science.

A team at HZB has, for the first time, reported polar vortices in (BaTiO₃/SrTiO₃)₁₀ superlattices on silicon. These results expand the range of materials and substrates on which polar topological textures can occur and open up new options for incorporating complex ferroelectric states into silicon-based technologies.

Via electrolysis, CO₂ can be reduced to CO, a raw material for further chemical products such as fuels. Within the GreenQuest Project, an internation team led by HZB chemist Prashanth Menezes has now systematically investigated catalyst layers made of silver nanoparticles, varying both the size of the particles and their density. The best yield was achieved with nanoparticles with diameters of around 10 nm, which were loosely distributed. Furthermore, they demonstrated how the economic efficiency of the electrochemical cell can be enhanced by integrating an additional chemical reaction at the anode, enabling the simultaneous production of a valuable formic acid, hydrogen, and CO in one device.

For the first time, researchers have directly imaged the magnetisation dynamics inside a spin Hall nano-oscillator — a nanoscale device that converts direct current into tunable microwave signals and is a promising building block for energy-efficient wireless communication and brain-inspired computing. A Swedish–German team led by the University of Gothenburg and Helmholtz-Zentrum Berlin (HZB) achieved this using time-resolved scanning transmission X-ray microscopy at the MAXYMUS instrument at BESSY II. The results, now published in Advanced Materials, reveal spin-wave features that had escaped previous, indirect measurement techniques.

Marcel Risch was appointed to a W2-S professorship in the Department of Physics at Freie Universität Berlin in August 2026. His research group has been transformed into the department 'Mechanisms of Sustainable Electrocatalysis'. Risch investigates the fundamental mechanisms of electrocatalytic reactions and, on this basis, develops knowledge- and data-driven strategies to improve electrocatalysts for the sustainable production of hydrogen, fuels and chemicals.

Very small biological samples and even individual biomolecules can now be examined under near-physiological conditions with high confidence at the BESSY II infrared beamline with a newly validated and improved technique: The nanoscale infrared spectroscopy (s-SNOM) with ultra-thin silicon-based membranes. An international team demonstrated after an initial proof of concept, that high-resolution (a few tens of nanometres) nano-IR measurements reliably match expected far-field IR spectra in an aqueous environment. This methodological advance provides a solid foundation for studying biomaterials or observing catalytic processes in a liquid environment.

On 7 September 2026, BESSY II was set into operation after a four-week shutdown. BESSY II is scheduled to resume full user operation on 22 September.

The SEAlab accelerator project successfully completed its final measurement campaign in summer 2026. The facility is now being dismantled, with many components set to be reused. The two accelerator physicists, Axel Neumann and Thorsten Kamps, explain what the project has achieved and provide an outlook for the future.

(Fe_0.63Ni_0.3Pd_0.07)₃P or FNPP is a magnetic material that exhibits complex magnetic structures even at room temperature. This makes the material of interest for spintronics, a field that could enable data processing with significantly lower energy consumption. One potential application is novel magnetic memory devices. However, generating and modifying the desired structures in a controlled manner remains a challenge to date. A new study led by HZB has now taken a step forward in this regard. They demonstrated at the worldwide unique VEKMAG-Station at BESSY II, that a tiny external B-field in the plane of the magnetic patterns is sufficient to change them.

Ultra-thin nickel oxide coatings can significantly improve the performance of anion exchange membrane (AEM) water electrolysers, a promising technology for producing green hydrogen. This was demonstrated by a team led by HZB scientist Dr. Michelle Browne. The results show that a nickel oxide film only 10 nanometres thick outperformed conventional nickel oxide powder electrodes while using less than 1% of the catalyst material. The study is published in the Journal of Materials Chemistry A,

Before pure copper oxide builds up, complex superstructures such as ‘29’Cu_xO, are formed. The new results on the '29' Cu_xO superstructure have relevance for catalyst research and corrosion protection in the development of safe copper containers for nuclear waste repositories.

Following predictions of the existence of fractons in quantum spin liquids by more general gauge field theories, researchers at HZB succeeded in detecting these quasi-particles also in a quantum solid-state model.

One method of storing solar energy is to use PEC electrolysers to produce hydrogen. However, scaling up this technology remains challenging. Now, a team at the HZB Institute for Solar Fuels has used 2D fluorescence imaging and particle velocimetry to observe the movement of ions and dissolved gases within the electrolyte during electrolysis. These new insights may prove useful in the development of larger PEC electrolysers.

A newly developed material for the electron contact improves the efficiency of single perovskite solar cells and perovskite/silicon tandem solar cells. The new material is based on a carborane molecule. It offers several advantages over the standard material C₆₀, as shown by the study led by Steve Albrecht’s team. The new material has since been patented and is already commercially available.

A novel measurement cell allows, for the first time, soft and hard X-ray investigations under high pressures of up to 20 bar and temperatures of up to 400°C. This provides new insights into thermocatalytic processes, such as the Fischer-Tropsch synthesis for producing synthetic fuels. The development of the measurement cell is considered a significant achievement within the Care-O-Sene project.

An international research collaboration has developed a new molecular strategy for controlling one of the most critical interfaces in perovskite solar cells. The resulting solar cells reached a power conversion efficiency of 26.19% in the n i p architecture, together with strong operational stability under prolonged illumination and elevated temperature. The results have been published in the Journal of the American Chemical Society.

Perovskite semiconductors efficiently convert sunlight into electrical energy; they are also inexpensive and extremely lightweight. A team at HZB has developed a triple-junction solar cell comprising different perovskite semiconductors, with a novel bilayer of graphene oxide (GO) and a self-assembled monolayer (SAM) as the hole conductor. This bilayer significantly increases both efficiency and long-term stability. The efficiency of the novel perovskite triple-junction solar cell is 27.3% and shows hardly any decline even after more than 770 hours of operation. The study has been published in the renowned journal Joule.

Materials with magnetic nanostructures have many potential applications such as in spintronics. To explore such materials, nanoscale magnetic-sensitive imaging techniques are very useful, but up to now only weak magnetic fields could be applied during the imaging process. Now an international collaboration led by Dr. Sergio Valencia, HZB, has developed an approach that overcomes this limitation. The team designed tiny magnetic flux concentrators (MFCs), into which the sample is placed. The geometry of the MFCs resembles a flower with a number of petals which focus the applied magnetic field into its center. This greatly expands the magnetic field range available during imaging, and so the range of magnetic systems that can be investigated. The micro-flowers, enhancing magnetic fields locally, can find application in different nanometric magnetic microscopy techniques.

A Berlin-based team from HZB and Center for the Science of Materials Berlin (CSMB) at the Humboldt-Universität zu Berlin has set a new record for a tandem solar cell. Using a combination of a CIGS semiconductor layer and perovskite, along with several optimised intermediate layers, they were able to convert 25.5% of sunlight into electrical energy. The previous record for this combination of materials and this size of cell stood at 24.6%. The new record has been certified and is visible in the prestigious Solar Cell Efficiency Tables (the "Green Tables"), which serve as the definitive ledger for the global photovoltaic community.

Reliable statements about the long-term stability of perovskite solar cells are still difficult to make. However, a new study by Dr Carolin Ulbrich’s team, published in the renowned journal Joule, highlights which methods are useful for this purpose and identifies areas where further research is needed.

Europe's first and only TES-spectrometer at a synchrotron source is now in operation at BESSY II, developed within a collaboration between the HZB, the MPI-CEC (Mühlheim-an-der-Ruhr, Germany) and the NIST (Boulder CO, USA). The photon detection efficiency of the new instrument exceeds that of wavelength-dispersive X-ray emission spectrometers by a factor of 100 to 1000.  It will be used to investigate the electronic properties of atomically thin layers, nanostructures and highly diluted atomic and molecular samples. The team is looking forward to receiving exciting research proposals from the user community.

Applying an external magnetic field during the synthesis of CoFe₂O₄ electrocatalysts triples the ammonia yield during electrocatalytic conversion. The magnetic field alters the surface states of the spinel oxide thin films, making catalytically active sites more accessible. In the journal 'Advanced Functional Materials', a team led by Marcel Risch at HZB and Sanjay Mathur at University of Cologne demonstrates a scalable strategy for developing next-generation electrocatalysts for efficient and sustainable chemical production.

The synthesis of materials can serve as a tool for developing smart, adaptive electrocatalysts. This rapidly evolving field of research involves in-situ analytics, data-driven discoveries and autonomous robotics. These new approaches could accelerate the discovery of long-lasting and efficient catalysts for future energy conversion and the decarbonisation of the chemical industry. A recent article by Dr Prashanth Menezes and his team in the renowned journal Angewandte Chemie provides an overview of this research.

Although solid-state batteries (SSBs) demonstrate high performance and are intrinsically safe, their capacity currently declines rapidly. A team from the TU Wien, Humboldt-University Berlin and HZB has now analysed a TiS₂|Li₃YCl₆ solid-state half-cell in operando at BESSY II using a special sample environment that allows for non-destructive investigation under real operating conditions. Data obtained by combination of soft and hard X-ray photoelectron spectroscopy (XPS and HAXPES) revealed a new degradation mechanism that had not previously been identified in solid-state batteries. They have gained some surprising insights, particularly regarding the harmful role played by intrinsic oxygen. This study provides valuable information for improving design and handling of such batteries.

Spintronic devices enable data processing with significantly lower energy consumption. They are based on the interaction between ferromagnetic and antiferromagnetic layers. Now, a team from Freie Universität Berlin, HZB and Uppsala University has succeeded in tracking, for each layer separately, how the magnetic order changes after a short laser pulse has excited the system. They were also able to identify the main cause of the loss of antiferromagnetic order in the oxide layer: the excitation is transported from the hot electrons in the ferromagnetic metal to the spins in the antiferromagnet.

How do radicals form in aqueous solutions when exposed to UV light? This question is important for health research and environmental protection, for example with regard to the overfertilisation of water bodies by intensive agriculture. A team at BESSY II has now developed a new method of investigating hydroxyl radicals in solution. By using a clever trick, the scientists gained surprising insights into the reaction pathway.

Six partners from research and industry, including Helmholtz-Zentrum Berlin (HZB), the Fritz-Haber-Institute of the Max Planck Society (FHI), BASF, Dunia Innovations, Siemens Energy, and the Technical University Berlin are launching a joint project to accelerate the catalyst discovery. The German Federal Ministry for Science, Technology and Space (BMFTR) is providing €30 million in funding for ASCEND (Accelerated Solutions for Catalysis using Emerging Nanotechnology and Digital Innovation). The research initiative targets the defossilisation of energy-intensive industries while safeguarding industrial competitiveness, with a focus on the chemical sector. The five-year project will start on 1^st April 2026.

As part of the CatLab project, HZB has acquired a unique facility for measuring the catalytic performance of thin-film catalysts. Built by ILS in Adlershof, it has now been delivered. The facility consists of a total of eight chemical reactors in which catalytic systems can be tested. At over €2.5 million, this is the largest single investment in the CatLab project.

Many diseases are linked to malfunctions of proteins in the organism. The three-dimensional architecture of these molecules is often highly complex, but it can provide valuable insights into biological processes and the development of drugs. X-ray diffraction at the MX beamlines of BESSY II can be used to decipher the 3D structure of proteins. To date, more than 5000 structures have been solved at the three MX beamlines. Here, we present a review and an outlook with  Manfred Weiss, head of the research group for macromolecular crystallography. 

Many proteins have a complex architecture that enables biological functions. Molecules can bind to specific sites on a protein and alter its function. A team at HZB has now investigated the Nsp1 protein, which plays a role in infection with the SARS-CoV-2 virus. They analysed protein crystals, previously mixed with molecules from a fragment library, and discovered a total of 21 candidates as starting points for drug development. At the same time, they also decoded the 5000th structure at BESSY II.

The element cobalt is considered a typical ferromagnet with no further secrets. However, an international team led by HZB researcher Dr. Jaime Sánchez-Barriga has now uncovered complex topological features in its electronic structure. Spin-resolved measurements of the band structure (spin-ARPES) at BESSY II revealed entangled energy bands that cross each other along extended paths in specific crystallographic directions, even at room temperature. As a result, cobalt can be considered as a highly tunable and unexpectedly rich topological platform, opening new perspectives for exploiting magnetic topological states in future information technologies.

MXene materials are promising candidates for a new energy storage technology. However, the processes by which the charge storage takes place were not yet fully understood. A team at HZB has examined, for the first time, individual MXene flakes to explore these processes in detail. Using the in situ Scanning transmission X-ray microscope 'MYSTIIC' at BESSY II, the scientists mapped the chemical states of Titanium atoms on the MXene flake surfaces. The results revealed two distinct redox reactions, depending on the electrolyte. This lays the groundwork for understanding charge transfer processes at the nanoscale and provides a basis for future research aimed at optimising pseudocapacitive energy storage devices.

In 2025, our solar facade in Berlin-Adlershof generated more electricity than in any of the previous four years of operation.

So-called forever chemicals or PFAS compounds are a growing environmental problem. An innovative approach to treating PFAS-contaminated water and soil now comes from accelerator physics: high-energy electrons can break down PFAS molecules into harmless components through a process called radiolysis. A recent study published in PLOS One shows that an accelerator developed at HZB, based on a SRF photoinjector, can provide the necessary electron beam.

In collaboration with scientists in Germany, EPFL researchers have demonstrated that the spiral geometry of tiny, twisted magnetic tubes can be leveraged to transmit data based on quasiparticles called magnons, rather than electrons.

Perovskite solar cells are widely regarded as the next generation photovoltaic technology. However, they are not yet stable enough in the long term for widespread commercial use. One reason for this is migrating ions, which cause degradation of the semiconducting material over time. A team from HZB and the University of Potsdam has now investigated the ion density in four different, widely used perovskite compounds and discovered significant differences. Tin perovskite semiconductors produced with an alternative solvent had a particular low ion density — only one tenth that of lead perovskite semiconductors. This suggests that tin-based perovskites could be used to make solar cells that are not only really environmentally friendly but also very stable.

Synchrotron radiation sources generate highly brilliant light pulses, ranging from infrared to hard X-rays, which can be used to gain deep insights into complex materials. An international team has now published an overview on synchrotron methods for the further development of quantum materials and technologies in the journal Advanced Functional Materials: Using concrete examples, they show how these unique tools can help to unlock the potential of quantum technologies such as quantum computing, overcome production barriers and pave the way for future breakthroughs.

Iron-nitrogen-carbon catalysts have the potential to replace the more expensive platinum catalysts currently used in fuel cells. This is shown by a study conducted by researchers from the Helmholtz-Zentrum Berlin (HZB), Physikalisch-Technische Bundesanstalt (PTB) and universities in Tartu and Tallinn, Estonia. At BESSY II, the team observed the formation of complex microstructures within various samples. They then analysed which structural parameters were particularly important for fostering the preferred electrochemical reactions. The raw material for such catalysts is well decomposed peat.

Perovskite solar cells are inexpensive to produce and generate a high amount of electric power per surface area. However, they are not yet stable enough, losing efficiency more rapidly than the silicon market standard. Now, an international team led by Prof. Dr. Antonio Abate has dramatically increased their stability by applying a novel coating to the interface between the surface of the perovskite and the top contact layer. This has even boosted efficiency to almost 27%, which represents the state-of-the-art. After 1,200 hours of continuous operation under standard illumination, no decrease in efficiency was observed. The study involved research teams from China, Italy, Switzerland and Germany and has been published in Nature Photonics.

High-temperature superconductivity is still not fully understood. Now, an international research team at BESSY II has measured the energy of charge carrier pairs in undoped La₂CuO₄. Their findings revealed that the interaction energies within the potentially superconducting copper oxide layers are significantly lower than those in the insulating lanthanum oxide layers. These results contribute to a better understanding of high-temperature superconductivity and could also be relevant for research into other functional materials.