Watching indium phosphide at work

Laser beam in the dark. The colours look different on the camera, as the human eye only sees the wavelengths of approx. 380-750 nm.

Laser beam in the dark. The colours look different on the camera, as the human eye only sees the wavelengths of approx. 380-750 nm. © HZB

Jonathan Diederich, has driven the joint project of HZB, TU Ilmenau and the University of Paderborn as part of his dissertation at HZB. 

Jonathan Diederich, has driven the joint project of HZB, TU Ilmenau and the University of Paderborn as part of his dissertation at HZB.  © Yuying Gao

Indium phosphide is a versatile semiconductor. The material can be used for solar cells, for hydrogen production and even for quantum computers – and with record-breaking efficiency. However, little research has been conducted into what happens on its surface. Researchers have now closed this gap and used ultra-fast lasers to scrutinise the dynamics of the electrons in the material.

"We are studying indium phosphide and looking at the processes on the surface of this semiconductor," says Jonathan Diederich, who has driven the joint project of HZB, TU Ilmenau and the University of Paderborn as part of a DFG package proposal for his dissertation at HZB. "Because the uppermost nanometres of the material are extremely important for the interesting processes." This is where, for example, water can be split into its components and thus supply green hydrogen. This electrophotochemical process works as follows: If a light particle hits an electron in the semiconductor, it receives energy, can leave its original place and initiates the chemical reaction. This happens via various energetic states that occur at extremely short intervals. The scientists led by HZB physicist and project manager Dr. Dennis Friedrich have now discovered nine of these states and determined their duration. Special attention was paid to the incoming energy. Because if it is too high, a so-called hot electron is generated. The excess energy diffuses into the surrounding material and no longer contributes to hydrogen production. "If these hot electrons could be utilised, it would not only be possible to overcome the fundamental efficiency limit of photoelectrochemical applications but also that of solar cells. Because they are also subject to this limit," explains Jonathan Diederich. However, a good understanding of the electron dynamics on the surface of the material is important for this.

Semiconductors bombarded with UV laser

The HZB research team scrutinised these with a titanium-sapphire laser, whose beam they split. They used the first beam to nudge the electrons in the material. With the second (UV) laser beam, they imparted additional energy to the electrons and emitted them. This allowed the electrons to be measured in so-called excited states instead of resting states. "This gives us information about the permitted energetic states in these fascinating materials," says the physicist. "This is because semiconductors have a certain gap in the energy levels that electrons are allowed to occupy; this is the band gap of the material." This distinguishes them fundamentally from metals, in which electron states are possible in a continuous energy distribution. This means that electrons are not bound to an atom in the metal. They can flow and are therefore electrically conductive. The situation is completely different with insulators. There, the electrons are firmly bound; electricity is not conducted. "In semiconductors, the electrons are released from their respective atoms above a set energy level. This leaves a gap in the energies that are permitted," adds the researcher. "Below the gap, electrons are firmly bound to the atomic nucleus, and above it, they can flow through the material." A semiconductor changes its conductivity at the "push of a button", so to speak. This can be used in a variety of ways. In computer chips, for example, where conduction and non-conduction become ones and zeros and thus enable computing. In solar cells via the photoelectric effect or in photoelectrochemical water splitting, which is being researched and optimised at the Institute for Solar Fuels at HZB under Prof. Roel van de Krol.

Ultra-high vacuum for absolute purity

One of the biggest challenges for the team was to produce the surface of the samples with the required purity. "The research group led by Prof Hannappel at TU Ilmenau took on this task," says Jonathan Diederich. "With their extensive experience in organometallic vapour deposition, they are the ideal project partner for this task." As even the smallest impurities would alter the surface properties, everything took place in an ultra-high vacuum. This led to the second challenge. The samples had to be transported from Ilmenau to the HZB in Berlin. "To do this, we connected a vacuum chamber to two car batteries," explains the physicist. "The battery lasts four hours. If you don't make it in that time, the sample is unusable." The measurement itself was also challenging. Time-resolved two-photon photoemission spectroscopy - as the method with the split laser is called - is a complex method, and the researchers also had to specially adapt their experimental setup. "To do this, we generate photons in the UV range," explains Jonathan Diederich. "Because we not only need a high time resolution, but also high photon energies to study the surface."

Kai Dürfeld / Science and technology journalist


You might also be interested in

  • Helmholtz Institute for Polymers in Energy Applications (HIPOLE Jena) Inaugurated
    News
    19.06.2024
    Helmholtz Institute for Polymers in Energy Applications (HIPOLE Jena) Inaugurated
    On June 17, 2024, the Helmholtz Institute for Polymers in Energy Applications (HIPOLE Jena) was officially inaugurated in Jena in the presence of Wolfgang Tiefensee, Minister for Economy, Science, and Digital Society of the Free State of Thuringia. The institute was founded by the Helmholtz Center Berlin for Materials and Energy (HZB) in cooperation with the Friedrich Schiller University Jena. It is dedicated to developing sustainable polymer materials for energy technologies, which are expected to play a key role in the energy transition and support Germany’s goal of becoming climate-neutral by 2045.
  • “Research and development in times of war: not only possible, but crucial!”
    Interview
    18.06.2024
    “Research and development in times of war: not only possible, but crucial!”
    The Ukraine Recovery Conference took place in Berlin on 11 and 12 June. On a side-event representatives from Helmholtz, Fraunhofer and Leibniz discussed how research can contribute to the sustainable reconstruction of Ukraine.
    In this interview, Bernd Rech, scientific director at HZB, talks about the importance of research during the war and projects such as Green Deal Ukraina.

  • MXenes for energy storage: Chemical imaging more than just surface deep
    Science Highlight
    17.06.2024
    MXenes for energy storage: Chemical imaging more than just surface deep
    A new method in spectromicroscopy significantly improves the study of chemical reactions at the nanoscale, both on surfaces and inside layered materials. Scanning X-ray microscopy (SXM) at MAXYMUS beamline of BESSY II enables the investigation of chemical species adsorbed on the top layer (surface) or intercalated within the MXene electrode (bulk) with high chemical sensitivity. The method was developed by a HZB team led by Dr. Tristan Petit. The scientists demonstrated among others first SXM on MXene flakes, a material used as electrode in lithium-ion batteries.